If you need assistance, please call 562-252-7889

Summer Pool Maintenance 101

Wednesday, May 13, 2020   /   by David Delgado

Summer Pool Maintenance 101

aying poolside is the quintessential way to spend a scorching summer day. It’s easy to imagine the fun that comes with owning a pool—floating in a tube on Caribbean blue waters, family poolside volleyball, romantic moonlit dips—without considering the responsibility that comes with it.

The truth is, owning a pool requires regular upkeep and maintenance: weekly vacuuming, chemical testing, and inspecting various filters, pumps, heaters, and more. But, by understanding the cost of owning a pool and how to properly care for it, you can learn to avoid the common and costly mistakes that take the fun out of pool ownership.

Here are six easy ways to keep your pool party-ready this summer.

1.    Know Your Chemicals


An under-maintained pool doesn’t just look gross, it can also contain E. coli and other dangerous bacteria. On the flip side, over-chlorinating can cause swimming pool rash and eye irritation.

Fortunately, you don’t have to be a chemist to maintain proper chemical levels in your pool. Using chlorine and pH testing strips to clean your pool is straightforward with modern testing kits.

The colors on a testing kit chart represent your pH level, which tells you if you added too much or not enough chlorine. The ideal amount of chlorine and pH is:

    • a free chlorine concentration of at least 1 ppm and
    • pH 7.2–7.8

If your pool doesn’t match these standards, simply adjust the chemicals or water levels.

Test your pool’s chemical levels at least once a week to keep maintenance work low and the water ready for swimming.

Related: The 3 P’s of Poolside Staging


2.    Practice Quick, Daily Pool Cleaning


Pool cleaning is just like house cleaning—doing little chores everyday can prevent a cleaning disaster at the end of the week.

One of the easiest (but most important) pool maintenance chores is skimming the top of the pool every day for leaves, bugs, and dirt. This helps your water circulate correctly and keeps you from having to add chlorine too often, improving pool feel and aesthetics.

Make sure to clean out the strainer basket and scrub the sides of the pool with a brush or pumice stone about once a week to prevent algae buildup. These tiny chores go a long way in keeping your pool clear and bacteria free.

3.    Learn to Use Your Pool Vacuum


How often you have to vacuum depends on how vigilant you are about daily skimming, since dirt and leaves left on the surface eventually sink to the bottom.

Pool vacuums come in a wide variety of styles and prices, from largely automated robotic cleaners to handheld systems with telescopic poles.

Vacuuming the pool can require a little bit of work to set up, but it is a key ingredient to a healthy pool. And, the process can be about as fast and simple as vacuuming a carpet indoors once you’re familiar with the equipment.

4.    Shock Your Pool Twice A Season

Shocking your pool can sound scary, but all it means is adding a high volume of chemicals all at once in order to “shock” the system and kill bacteria. You only have to shock your pool about twice a season to counteract contamination.

For safety, make sure to wear protective eye goggles and rubber gloves when shocking the pool. Here are a few tips to help get you started:

    • Use one pound of shock per 10,000 gallons of water.
    • Dissolve one pound of shock solution in a five-gallon bucket of warm water before adding it to the pool.
    • Once the shock is dissolved, slowly pour the solution around the pool.
    • Shocking the pool works best at evenings or night. Not only can sunlight dissolve some chemicals and make them less effective, but the chlorine levels can balance out while you’re sleeping.

Just be sure to wait until chlorine levels are back to normal (anywhere from 15 minutes to 8 hours depending on the kind of shock you used) before going for a swim or you risk serious skin irritation.

5.    Check Your Water Level


Everyday summer play can cause major fluctuations in your pool’s water level. The perfect water level is halfway up the skimmer line.

If your water level gets too low it could reduce safety and ruin your pool’s pump. Adding water is easy: just grab a hose and fill it up. Be careful not to overfill your pool, though. Renting a pump to lower the water level can be labor intensive and expensive.

6.    Call in the Pros


With the above tips, you can take care of most summer pool maintenance by yourself. But, a pool is still a complex system—chemicals, heaters, filters, pipes—and sometimes even the savviest pool owners need an expert opinion.

Getting a yearly checkup by an expert to make sure all your equipment is working will save you money and keep your pool operating all summer long.

Expert Realty, Inc.
David Delgado
1400 N Harbor Blvd Ste 640
Fullerton, CA 92835
562-252-7889
DRE# CalBRE# 01385731

Based on information from California Regional Multiple Listing Service, Inc. as of July 12, 2020. This information is for your personal, non-commercial use and may not be used for any purpose other than to identify prospective properties you may be interested in purchasing. Display of MLS data is usually deemed reliable but is NOT guaranteed accurate by the MLS. Buyers are responsible for verifying the accuracy of all information and should investigate the data themselves or retain appropriate professionals. Information from sources other than the Listing Agent may have been included in the MLS data. Unless otherwise specified in writing, Broker/Agent has not and will not verify any information obtained from other sources. The Broker/Agent providing the information contained herein may or may not have been the Listing and/or Selling Agent.